by Solar-X
Buy new:
(Visit the Best Sellers in Energy Controllers list for authoritative information on this product's current rank.)
Solar-X SunTracer includes standard features and capabilities not found in any other small PV controller. -- SunTracer 's technology provides: - Exceptional Reliability - PWM Battery Charging - Consistent High Quality - 100% solid state - Series design (not shunt) - True 0 to 100% PWM duty cycle - Setpoint accuracy to 35 mV - Rated for 25% overloads - Fully encapsulated in epoxy potting - Marine rated terminals / anodized case - Temperature compensation - Sealed / Flooded battery select - No need to derate - Parallel for 40 amps or more - Green charging / Red LVD indicators -- Mechanical Specifications: - Wire size #10 AWG (5.2 mm2) - Note: Some #10 spade connectors may not fit terminals - Anodized aluminum case - Marine rated terminals - Epoxy encapsulated - Weight is 8 oz (0.23 kg) -- Electrical Specifications: 12 Volt System - 25 Volt Max PV - Rated Solar Input: 10A - Rated Load: 10A - Max array short circuit current 12.5A - 25% Current Overload 5 min. - Regulation Voltage: Sealed Battery 14.1 V 28.2 V - Flooded Battery 14.4 V 28.8 V - Temp. Comp. (mV/ C) -28 -56 - Self-consumption 6 to 10 mA - Operating Temp. -40 to +85 C -- Reverse Current Protection: The SunTracer prevents the battery from discharging through the PV array at night. There is no need to install a blocking diode for this purpose. -- Noise: The SunTracer circuit minimizes switching noise and filters all noise output to extremely low levels when the system is properly grounded. If noise is present in a telecom load, it is most likely a grounding problem in the system.
No comments:
Post a Comment